Wall plastering machine mortar pump for sale

Mortar is a cementing material used in building bricklaying. It is composed of a certain proportion of sand and cementitious materials (cement, lime plaster, clay, etc.).
The main principle of the mortar pump is that it has no pulse, high working pressure, large flow, high production efficiency, convenient operation, safety and reliability. Easier maintenance, compact structure, flexible movement, etc. Automatic pressure control setting, large flow and long conveying.
GMP70/30 wall plastering machine, the double piston pump can handle aggregates with a particle size up to a maximum of 5 mm, ensuring high efficiency, low maintenance costs and low energy consumption. Thanks to pump unique design inspiration is equipped with 2 pistons. Machine guarantees uniform and continuous spray pattern.
GMP70/30 wall plastering machine mortar pump feature:
1.Double cylinder & double-acting, ball valve, quick clamp connection, operation and cleaning conveniently. Paddles in hopper with Reciprocating movement, prevent hopper materials deposition .
2.The screen adopts rubber spring with cone bolt installation, convenient disassembly;
3.Equipped with double special mortar nozzles, making spraying operation more smoothly, continuously and reducing the rebound effectively.
4.Machine light, 1-2 person can easily move the machine.
5.Independent electric control box and remote control system, machine operation is safer. Waterproof vibrator.
6.Quick installation and rubber piston long work life and low maintenance cost.
Use and maintenance of mortar pump:
Before using the mortar pump, you should turn on the test machine and try it out. Run the machine for 5 minutes in an empty state, look at the direction of the motor belt, and see that the machine can run the mortar after the machine is running normally.
After the machine is running normally, we started to operate the machine for a formal test. First, clean the machine with clean water for lubrication, and then use the mortar pump to suck some thin gray water to lubricate the lower pipe, because the inner wall of the high-pressure steel wire hose is rough It ’s also a good way to lubricate the pipeline by passing it with dilute grey water. Another important point to note is that before the mortar is officially inhaled, the pipe should be filled with dilute grey water or clear water. To prevent the tube from being vacuumed, there is another factor that must be paid attention to. It is necessary to pay attention to cleaning the machine after use, because mortar and cement slurry are easy to solidify, and they are easy to solidify in the machine or the tube. It is convenient to use the machine next time, try to clean it when the slurry is not dry, so as to extend the life of the machine.
We are the factory, we can provide mortar pump for you. Before we send quotation, please let me know the following question:
1. what is output of mortar pump do you want?
2. what is max. aggregate?
3. what is max. vertical and horizontal conveying distance?
4. which engine do you prefer? Electric motor or diesel engine. If electric motor, please let me know your local voltage.
I sincerely want to do business with you. If you have any questions, please contact us.