Our company is a manufacturer of mobile concrete mixer specializing in the production of concrete mixers. It is an advanced concrete mixer at home and abroad. It is an ideal construction equipment model with long service life of plate and blades and easy maintenance. For plastics, dry, lightweight aggregate concrete and a variety of mortar and mortar mix.
The concrete mixer shaft we produce is connected with the transmission mechanism of the transmission mechanism and driven by the transmission mechanism of the transmission mechanism. The drum sleeve surrounds the ring gear of the cylinder sleeve and meshes with the ring gear on the shaft of the gear. The utility model has the advantages of simple and reasonable structure, overcoming the sliding phenomenon between the roller and the mixer when the gear meshes with the gear ring. The drive mechanism can further ensure the elimination of the cylinder between the drum and the mixer.
Mobile concrete mixer for a variety of large, medium and small prefabricated files and roads, bridges, water conservancy, ports and other industrial and civil engineering, dry mix concrete, plastic concrete, liquid concrete, lightweight aggregate concrete and mortar , Is an efficient model that is widely used.
Concrete mixer product design, reasonable structure, novel layout, easy maintenance, highly designed leg parts: JS500 is 1500mm, JS750 ~ 1600mm, JS1000 is 3500mm and 4000mm, JS1500 and JS2000 is 4500mm, the user can from the dump truck, Dump trucks, mixer are used, but also can be based on the special requirements of customers restructuring at the same time, to meet the needs of users.
Mixing instructions:
1, Before use should try to run once, during the test run should check all parts of the machine is stronger than before, especially in the transport of bearing parts are loose, closed the main switch, communication power, idling test run.
2. Empty run test. No abnormal noise was found, the bearing heat generated high, so that mixer into production.
3. If the machine is abnormal or abnormal, immediately stop mixer thoroughly check.
4. Do not use the load is too large, the general use of the motor load to determine, with 380V motor overload current mixing, under normal circumstances does not exceed 6 amps, such as overload should immediately reduce the mixing capacity.
5. The manager must be familiar with the mixer's technical performance, internal structure, control structure and working principle. Do not leave the workplace during operation, to prevent malfunction and damage to the machine parts, to ensure safe production.
